Diesel Dipper Complete

Peter Weide is inventor of the Diesel Dipper®.

The Diesel Dipper® sucks from the VERY BOTTOM of the tank. It will remove Diesel Bug, sludge, water and contaminants that
are sloshing about on the very bottom, below the fuel suction. Sucked up with a 12v pump into the Dipper they are then removed by simply draining off. The clean fuel is returned back to the tank through a fine washable stainless steel filter.

The Dipper is a "By Pass system", independent of the engine it transfers the contents from the bottom of your large diesel tank into a small tank where they are removed. The "Tank Separator" forms the heart of the system. Entering the top, water and sludge collects in a chamber and is easily drained off.

The Diesel Dipper is connected to the drain plug. If a drain plug is not fitted we can supply a "Dip Tube". This simple fitting, attached to the top of the tank, allows a 10 mm draw pipe to be pushed through to rest on the bottom. The Diesel Dipper is then connected to the top of this pipe.

The upgraded model of our Diesel Dipper® Purifier!
This diesel separator system uses our patented technology which removes free water & sludge from diesel without the use of filters, and comes equipped with:

• A 12v pump (24v available), making it suited for any size fuel tank.
• A 10-micron water & particulate filter, capable of removing suspended & emulsified water.
• A visual flow indicator, so you always know if the system is working as intended and when to replace the filter.
• A visual inspection chamber, extending the holding capacity of the water and making it clear when the drain valve needs closing.

This system is fully independent from the engine and works best when you are at sea pitching and rolling, as all the contaminates become stirred up and are easily sucked out.

Get complete control of your diesel with this state-of-the-art separator.

Made in the UK

For tanks with excessive sludge, we recommend a pre-strainer to prevent the system being overloaded on first use.